Balancing equipment designed for crushers, fans, mulchers, augers on combines, shafts, centrifuges, turbines, and many
Posted: Wed Jul 09, 2025 7:35 pm
Description:
Order on eBay
Or get a €100 discount on the official website vibromera.eu with promo code VB100
Description of the Balanset-1A OEM Device
The Balanset-1A OEM is a compact, dual-channel solution for balancing and vibration analysis of rotating mechanisms, including crushers, fans, mulchers, choppers, shafts, centrifuges, turbines, and other rotary equipment.
Key Features and Capabilities
Vibrometer Mode
Tachometer: Precise rotational speed measurement (RPM).
Phase: Measures the phase angle of vibration signals for detailed analysis.
1x Vibration: Measures and analyzes the primary frequency component.
FFT Spectrum: Detailed analysis of the vibration signal's frequency spectrum.
Overall Vibration: Keeps track of overall vibration levels.
Measurement Log: Stores data for subsequent analysis.
Balancing Mode
Single-Plane Balancing: Adjusts rotors in one plane to reduce vibration.
Two-Plane Balancing: Balances rotors dynamically in two planes.
Polar Diagram: Visualizes imbalance on a polar chart for precise placement of corrective weights.
Last Session Recovery: Allows resuming the previous balancing session.
Tolerance Calculator (ISO 1940): Computes permissible imbalance per ISO 1940 standards.
Grinding Wheel Balancing: Uses three counterweights to eliminate imbalance.
Visualizations and Diagrams
Overall Graphs: Visualizes total vibration levels.
1x Graphs: Visualizes vibration characteristics at the primary frequency.
Harmonic Graphs: Displays the presence and impact of harmonic frequencies.
Spectral Graphs: Displays the frequency spectrum for detailed analysis.
Supplementary Functions
Archive: Save and access past balancing sessions.
Reports: Produce detailed reports on balancing results.
Rebalancing: Easily repeat the balancing process using saved data.
Serial Production Balancing: Suitable for balancing rotors during serial production.
In the Box
Balanset-1A OEM is supplied with:
A measurement module with interface.
Two vibration sensors.
Optical sensor (laser tachometer) with magnetic mount.
Software (computer not included, available as an option).
Order on Allegro
Save €100 on vibromera.eu with promo code VB100!
Instagram: https://www.instagram.com/vibromera_ou/
Youtube: https://www.youtube.com/@vibromera
Website: vibromera.eu
Order on eBay
Or get a €100 discount on the official website vibromera.eu with promo code VB100
Description of the Balanset-1A OEM Device
The Balanset-1A OEM is a compact, dual-channel solution for balancing and vibration analysis of rotating mechanisms, including crushers, fans, mulchers, choppers, shafts, centrifuges, turbines, and other rotary equipment.
Key Features and Capabilities
Vibrometer Mode
Tachometer: Precise rotational speed measurement (RPM).
Phase: Measures the phase angle of vibration signals for detailed analysis.
1x Vibration: Measures and analyzes the primary frequency component.
FFT Spectrum: Detailed analysis of the vibration signal's frequency spectrum.
Overall Vibration: Keeps track of overall vibration levels.
Measurement Log: Stores data for subsequent analysis.
Balancing Mode
Single-Plane Balancing: Adjusts rotors in one plane to reduce vibration.
Two-Plane Balancing: Balances rotors dynamically in two planes.
Polar Diagram: Visualizes imbalance on a polar chart for precise placement of corrective weights.
Last Session Recovery: Allows resuming the previous balancing session.
Tolerance Calculator (ISO 1940): Computes permissible imbalance per ISO 1940 standards.
Grinding Wheel Balancing: Uses three counterweights to eliminate imbalance.
Visualizations and Diagrams
Overall Graphs: Visualizes total vibration levels.
1x Graphs: Visualizes vibration characteristics at the primary frequency.
Harmonic Graphs: Displays the presence and impact of harmonic frequencies.
Spectral Graphs: Displays the frequency spectrum for detailed analysis.
Supplementary Functions
Archive: Save and access past balancing sessions.
Reports: Produce detailed reports on balancing results.
Rebalancing: Easily repeat the balancing process using saved data.
Serial Production Balancing: Suitable for balancing rotors during serial production.
In the Box
Balanset-1A OEM is supplied with:
A measurement module with interface.
Two vibration sensors.
Optical sensor (laser tachometer) with magnetic mount.
Software (computer not included, available as an option).
Order on Allegro
Save €100 on vibromera.eu with promo code VB100!
Instagram: https://www.instagram.com/vibromera_ou/
Youtube: https://www.youtube.com/@vibromera
Website: vibromera.eu